Note: Orient the RGB LED / reset button over the USB connector on any expansion board
Store: Buy Here
Getting Started: Click Here
The datasheet of the GPy is available as a PDF File
The drawing of the LTE-M antenna is available as a PDF File
The Gpy is certified for:
The pinout of the GPy is available as a PDF File
Please note that the PIN assignments for UART1 (TX1/RX1), SPI (CLK, MOSI, MISO) and I2C (SDA, SCL) are defaults and can be changed via software.
Do not use the 3.3V pin in combination with the Vin pin to supply the device as this will damage the voltage regulator on the board.
Always attach the appropriate antenna when using a wireless connection (LTE). For WiFi / BLE, it is not mandatory to use an external antenna when you did not explicitly specify this in your code.
The AT commands for the Sequans Monarch modem on the GPy are available in a PDF file